Maximum serial lines on system is 41. The Base Hardware System StorageWorks BA355 Rackmount Enclosure (Step 1) includes 1 serial line. This leaves a maximum of 40 additional asynchronous serial lines to choose as options. DHV11-M 8 serial lines Choose a maximum of two. CK- StorageWorks BA355 Rackmount Enclosure -AA Cabinet kit with full modern control, RS232 signalling RT-11, CTS-300, and supporting 8 25-pin connections MicroPower/Pascal-RT are not supported on the bulkhead on the DHV11. DHV11-M 8 serial lines Choose a maximum of five. CK-DHV11-VA Cabinet kit with no modem control, RS232 signalling RT 11, CTS-300, and - supporting 8 remote 25-pin StorageWorks BA355 Rackmount Enclosure /Pascal-RT are not supported connections on the DHV11. 1 DHV11-M 8 serial lines Choose a maximum of five. 1 CK- StorageWorks BA355 Rackmount Enclosure -WA Cabinet kit with no modem control, RS423 signalling RT-11, CTS-300, and supporting 8 remote MMJ MicroPower/Pascal-RT are not supported DECconnect connections on the DHV11. DZQ11-M 4 serial lines Choose up to five if no DHV11 is used. CK-DZQ11-DA Cabinet kit with full modem control, RS232 signalling supporting 4 25-pin connections on the bulkhead 1 StorageWorks BA355 Rackmount Enclosure M - 4 serial lines Choose a maximum of two if no other 1 CKDLVJ1LA - - Cabinet kit option is used. One terminal (video, hardcopy, or graphics) is necessary as a console for a system to function. Total terminals should not exceed 17 plus additional number of serial lines selected in Step 8. All keyboards and most terminals are 120 V. Refer to StorageWorks BA355 Rackmount Enclosure Table 1.13 for non-120-V alternate-language keyboards and terminals.