StorageWorks Edge Switch 2/12 M-Series-R 0.8-Mbyte dual-diskette drive for mounting in 19-inch stan- dard equipment rack. 120/240 Vac. Requires StorageWorks Edge Switch 2/12 M-Series enclosure. StorageWorks Edge Switch 2/12 M-Series* Rackmount chassis for use with up to two 5.25-inch mass- storage devices, in any combination. StorageWorks Edge Switch 2/12 M-Series-SC 5.25-inch blank front panel. *When ordering an StorageWorks Edge Switch 2/12 M-Series 5.25-inch kit for UNIBUS cabinets, you may also need to order an StorageWorks Edge Switch 2/12 M-Series SC 5.25-inch blank panel to be installed beneath - (or above) the StorageWorks Edge Switch 2/12 M-Series. When adding a TK50 desktop or rackmount unit to a cabinet-based PDP 11 UNIBUS system, you must also order a TUK50 AB con- - - troller. On a PDP 11 UNIBUS system, the RX50 unit requires an RUX50 YA - - controller with 2.7-meter cable. Option Mounting dcAmps Watts Bus Loads I/O Panel Requirements Drawn @ Drawn Drawn Insert Size 5V 12V ac de StorageWorks Edge Switch 2/12 M-Series Dedicated Space 0.85 1.8 25.9 0.0 0.0 N/A Tapes StorageWorks Edge Switch 2/12 M-Series