The PCI to Dual Port 10/100 UTP Ethernet, NIC and Base is a 16-line, asynchronous multiplexer with direct memory access that provides local and remote interconnection between PCI to Dual Port 10/100 UTP Ethernet, NIC and Base PDP-11 and VAX systems and EIA RS-232-C/CCITT V.28 or EIA RS-423-A/CCIT V.10 ter- minals The PCI to Dual Port 10/100 UTP Ethernet, NIC and Base operates at program-selectable speeds of up to 38,400 bits per second in half- or full-duplex. Actual device speed depends on current Digital operating systems and system configuration. Full modern control is available on all 16 lines. Split-second transmit and receive rates are supported on each line, making for more efficient use of communications facilities by reducing the software demand for the receive lines. PCI to Dual Port 10/100 UTP Ethernet, NIC and Base EIA RS-232-C/CCITT V.28 or EIA RS-423-A/CCITT V.10 interface with full modern control and DMA. Includes base module only. For system installation, select one of the following cabinet kits: CK-PCI to Dual Port 10/100 UTP Ethernet, NIC and Base -AD For general purpose use in shielded UNIBUS cabinet and in the PCI to Dual Port 10/100 UTP Ethernet, NIC and Base-11X84. Gable length is 10 feet. CK-PCI to Dual Port 10/100 UTP Ethernet, NIC and Base-AE For kernel cab of PDP-11/84. Gable length is 7 feet. CK-PCI to Dual Port 10/100 UTP Ethernet, NIC and Base-AF For use with PDP-11/84 OEM enclosure. Cable length is 3 feet.