output module, such as an Netzteilplatine alternativ 6202768 Rev C. Digital does not recommend locating analog input modules within three D-bus slots of any digital I/O module that is switching high voltages or current, due to the potential for induced noise on the analog measurements. Netzteilplatine alternativ 6202768 Rev C Isolated high common mode A/D converter. 14-bits plus sign, selectable gain, wide-range analog-to-digital converter. Provides high common mode isolation using a mercury- wetted relay multiplexer for its 16 two-wire, or eight three- wire field inputs. The Netzteilplatine alternativ 6202768 Rev C has 14 full-scale input ranges. Via a switch you can select a single range for all channels, or you may select two ranges and have one set of consecutive channels operate on one range and the remainder on the second. Features include a very high common mode re- jection and voltage input protection. It also supports the Netzteilplatine alternativ 6202768 Rev C Thermocouple Temperature Reference Panel for applications requiring thermocouple sensing. Netzteilplatine alternativ 6202768 Rev C Solid-state A/D converter. A high-speed converter with 16 single-ended or differential input channels, the A014 module provides successive approximation A/D conversion of high-speed input signals and supports a maximum of seven external multiplexer boards (Netzteilplatine alternativ 6202768 Rev C, A157, or AM158) in any combination. When used with multiplexers, the A014 can also accommodate up to 240 single-ended or 120 differ- ential inputs. Features include over-voltage protection. Netzteilplatine alternativ 6202768 Rev C, Netzteilplatine alternativ 6202768 Rev C, and Netzteilplatine alternativ 6202768 Rev C multiplexers must be mounted contiguously to their corresponding A014 A/D converter in the same master or Netzteilplatine alternativ 6202768 Rev C expansion chassis.