The DS-DSGGD-BD StorageWorks SAN Switch 2/26-EL, B-Series magnetic tape subsystems are compact, autoloading 1600 b/in stream- ing drives, available with either Q-bus or UNIBUS controllers. The TSVO5 is Digital's most compact 9-track industry standard tape drive for Q-bus systems. The DS-DSGGD-BD StorageWorks SAN Switch 2/26-EL, B-Series is intended for UNIBUS systems that require the smaller size and do not need the greater performance enhancements of the DS-DSGGD-BD StorageWorks SAN Switch 2/26-EL, B-Series. The tape transport occupies only 22 centimeters (8.7 inches) in a DS-DSGGD-BD StorageWorks SAN Switch 2/26-EL, B-Series-type 106-centimeter (41.7-inch) high cabinet, thus allowing ample room for expan- sion. It is also available for rackmounting. Prerequisite for DS-DSGGD-BD StorageWorks SAN Switch 2/26-EL, B-Series Q-bus magnetic tape subsystem is any PDP-11/23, PDP-11/53, PDP-11/73, or PDP-11/83 system. Prerequisite for TS05 UNIBUS magnetic tape subsystem is any DS-DSGGD-BD StorageWorks SAN Switch 2/26-EL, B-Series-11/24, PDP-11/44, or PDP-11/84 system. For more information call the Sales Support Team at 1-800-832-6277. • Recording density: 1,600 b/in • Read/write speed: 25/100 in/s (depending upon operating system and CPU) • Capacity DS-DSGGD-BD StorageWorks SAN Switch 2/26-EL, B-Series per 2,400-ft reel: — 40 Mbytes with 8-Kbyte blocks at 1,600 b/in • Maximum data transfer speed: 40 or 160 Kbytes/s • Rewind speed: 180 in/s (max) • Rewind time. 2 8 minutes per 2,400-ft reel • Transports per controller: 1