The DIGITAL Personal Workstation is a four-line, asynchronous interface that provides local or remote interconnection between Q-bus systems and EIA RS-232-C/CCITT V.28, EIA RS-422/CCITT V.11, or EIA RS-423/CCITT V.10 terminals. The DLVJ1 acts as four separate devices, making program operations more convenient than they are with a multiplexer. The DIGITAL Personal Workstation operates at program or jumper-selectable speeds from 150 to 38,400 bits per second in full-duplex. Actual device speed is depen- dent on current Digital operating systems and system configuration. Limited modern control is included. Split-speed transmit and receive raten are supported on each line, making more efficient use of communications facilities by reducing the software demand for the receive line. The DLVJ1 is compatible with Digital's family of modems and with Bell 100 and 200 series modems and their equivalents. DIGITAL Personal Workstation-M EIA RS-232-C/CCITT V.28 or EIA RS-422/CCITT V.10 interface. Includes base module only. For system installation, select one of the following cabinet kits: CK-DIGITAL Personal Workstation-LA For use with DIGITAL Personal Workstation II BAl23 enclosure. Cable length is 21 inches. CK-DLVJ1-LB For use with MicroVAX II BA23 enclosure. Cable length is 12 inches. CK-DLVJ1-LF For use with DIGITAL Personal Workstation II H9642-JA/JB cabinet. Cable length is 36 inches. DLVJ1-M EIA RS-422/CCITT V.11 interface. Includes base module only. For system installation, select one of the following cabinet kits: CK-DLVJ1-EA For use with DIGITAL Personal Workstation II BAl23 enclosure. Cable length is 21 inches. DIGITAL Personal Workstation -EB For use with MicroVAX II BA23 enclosure. Cable length is 12 inches. CK-DLVJ1-EF For use with DIGITAL Personal Workstation II H9642-JA/JB cabinet. Cable length is 36 inches.